[Fwd: Unrouteable Mail for " panorama-L"@sci.monash.edu.au]

[Science Faculty Postmaster <postmaster@xxxxxxxxxxxxxxxxx>]

-------- Original Message --------
Subject: Unrouteable Mail for  " panorama-L"@sci.monash.edu.au
Date: Sat, 18 Nov 2000 06:18:22 +1100
From: "Name Router 4.1" <postmaster@xxxxxxxxxxxxxxxxx>
To: droberts@xxxxxxxxxxxxx


--Boundary_(ID_mynbnF9s6mdATclMwMqEig)
Content-type: Text/Plain; charset=US-ASCII
Content-transfer-encoding: 7BIT

Cannot route mail to the following:
 
" panorama-L"@sci.monash.edu.au  (No Route found)

--Boundary_(ID_mynbnF9s6mdATclMwMqEig)
Content-type: Text/Plain; Charset=ISO-8859-1
Content-transfer-encoding: 7BIT

To use the Name Router to guess the Email address of a *Staff* member,
send to  First.Lastname@xxxxxxxxxxxxxxxxxxx
     or  First.Middle.Lastname@xxxxxxxxxxxxxxxxxxx
The Lastname field in the e-mail address *must* be supplied, and must
  match the person's last name.
The First and Middle name fields also need to match the person's name,
  but can also be abbreviated or omitted as long as the resulting email
  address is not ambiguous.
The list of supported Group fields is currently
  Adm, ArtDes, Arts, BusEco, CeLTS, Education, Eng, Gadm, General,
  InfoTech, ITS, Law, Lib, Med, Nursing, Sci, and VCP
The Group field can be omitted to search all these Staff groups.

To send Email to a *Student* send to <usercode>@student.monash.edu.au

Or you can use the Findemail service to send a message to someone:
  http://www.monash.edu.au/cc/services/email/findemail.html

To send Email to a someone not registered with the Name Router, you have
to send to their full  usercode@xxxxxxxxxxxxxxxxxxxxxxx  mailbox
address.

Note. This site does not want or condone unsolicited junk or chain
email.

This was an automated message from the Mail System.
Please report problems to  helpdesk@xxxxxxxxxxxxx

Returned message follows

--Boundary_(ID_mynbnF9s6mdATclMwMqEig)
Content-type: MESSAGE/RFC822

Received: from inav.net ([64.6.64.4])
 by vaxh.cc.monash.edu.au (PMDF V5.2-31 #29714)
 with SMTP id <01JWOBXBAHMO8X2TWO@xxxxxxxxxxxxxxxxxxxxx> for
 " panorama-L"@sci.monash.edu.au; Sat, 18 Nov 2000 06:18:21 +1100
Received: (qmail 2024 invoked by uid 0); Fri, 17 Nov 2000 13:18:13 -0600
Received: from dip336.inav.net (HELO soli.inav.net) (205.160.208.206)
 by soli.inav.net with SMTP; Fri, 17 Nov 2000 13:18:13 -0600
Date: Fri, 17 Nov 2000 13:18:21 -0600
From: Don Roberts <droberts@xxxxxxxxxxxxx>
Subject: Noblex repair
To: panorama-l <" panorama-L"@sci.monash.edu.au>
Reply-to: droberts@xxxxxxxxxxxxx
Message-id: <3A15847E.21879AE8@xxxxxxxxxxxxx>
MIME-version: 1.0
X-Mailer: Mozilla 4.73C-CCK-MCD {C-UDP; EBM-APPLE} (Macintosh; U; PPC)
Content-type: text/plain; x-mac-creator=4D4F5353; x-mac-type=54455854;
 charset=us-ascii
Content-transfer-encoding: 7BIT
X-Accept-Language: en

Accidentally sent this to infrared list first.  Not an intentional cross
post.


I bought a used older Noblex 6/150 and I would like a recommendation for

repair facilities.  So far, and I admit that I had to guess at loading
procedure at first, I have gotten only 4 1/2 pics per roll with the last

frame being cut in half by the end of the roll.  Also the neg spacing is

about an inch and a half or so.  I'm not sure I could get the full six
exposures with that wide a space between negs.



--
=========================================================
     Don Roberts -Bittersweet Productions - Iowa City, Iowa

*                                              *
"Sometimes I think we're alone. Sometimes I think we're not.
 In either case, the thought is staggering."  - Buckminster Fuller
==========================================================


--Boundary_(ID_mynbnF9s6mdATclMwMqEig)--